M300DP L Series Expansion I/O Module – Installation / User Manual
30
Copyright 2016 MBW Technologies, LLC All Rights Reserved
Re-Assemble
9. Mount the Auto Start module.
10. Connect the control panel connector (HDP24-21 connector) to the
engine harness.
11. Re-install the control panel.
12. Connect battery.
13. Turn ignition key to “ON” position.
14. Ensure digital display is active. If display is not active;
a. Check battery and power connections.
b. Check ignition switch is on position.
15. Ensure system is displaying data for engine speed, oil pressure
and temperature.
Figure 1. Expansion I/O Module
Insert Yellow wire into P3-3 &
Green wire into P3-4
S1
P4
Insert six wires into
engine connector
Connect Black wire to
throttle switch
M300DP L Series Expansion I/O Module – Installation / User Manual
Copyright 2016 MBW Technologies, LLC All Rights Reserved
7
MP300DP System Operation
Menu Navigation
The Mode Button is multi-functional and is used as an escape and enter
key. When the Mode key is pressed for less than 1 second it is considered
an escape action. When pressed for greater than 1 second is considered
an enter function. For example, to enter a menu selection or save an
entered value the button must be pressed and held for greater than 1
second. When escaping a menu selection, momentary Mode Button
presses are used. The only exception to these actions is entering the
main menu. From any runtime data display screen a momentary press of
the Mode Button will activate the main menu.
Main Menu
The Main Menu allows the user to access all areas of the M150L Control
System. To access the Main Menu press the Mode button. To access
menu items highlight the desired selection using the “
▼
” or “
▲
” keys and
press & hold the
MODE
for 1 second.
