M300DP L Series Expansion I/O Module – Installation / User Manual
22
Copyright 2016 MBW Technologies, LLC All Rights Reserved
Wiring Diagram
M300DP L Series Expansion I/O Module – Installation / User Manual
Copyright 2016 MBW Technologies, LLC All Rights Reserved
15
Active State
Each digital input can be configured to determine its active state. This
allows the user to set the digital input for an input device that has either a
Normally Open (N.O.) contact or a Normally Closed (N.C.) contact. The
active state for a N.O. switch should be set to “Closed” (closure to ground)
and the active state of a N.C. switch should be set to “Open” (input is
open).
On/Off Delay (s)
The On/Off Delay parameters control how long the active and inactive
states must be stable before action is taken. The settable range for these
parameters is 0.0 to 60.0 seconds.
IO Status
The IO Status Display is provided for diagnostic purposes. This screen
provides information about the status of the M300DP provides the Mode,
the status of the DI1 and DI2 inputs and the counts for the AI1 and AI2
inputs. AS provides the status of the keyswitch: Auto =1, On =2, and
Start=3
