www.mbosystems.com
Phone number: 1-514-733-4274
MAKE YOUR CASH FLOW
MBO Systems
110 Watopeka street
Windsor (Quebec) J1S 1N2
Canada
b) Single Denomination Counting Mode (Sort)
This mode is mainly for counting the same denomination
BankNotes, for example, to count the same denomination already
sorted.
The device will stop when a different denomination is detected.
Remove the BankNote and continue counting.
The device automatically recognizes the first BankNote and
counts following BankNotes accordingly. Thus, when the sorting
version is applied, it will stop when a different denomination is
detected.
When this mode is selected, the device can also calculate
amount and quantity, as well as the serial number reading.
c) Piece Counting Mode (Count)
When this mode is selected, it will not calculate the amount, but
only the quantity.
When the
ADD
function is not selected, it will only display the
current counting quantity.
When the
ADD
function is selected, it will display the current
counted quantity and the accumulated counted quantity.
NOTE:
When MIX & SINGLE modes are selected, the device verifies the BankNotes by images, MG, UV and DB (double
notes detection). CNT mode has only DB detection.
SERVICE
BankNote feeding adjustment
In case the gap of the different mechanical BankNotes
transportation components is too narrow or wide or if
the BankNotes input is not smoothly working, adjust the
“Feed gap” by turning the “Regulator Cap”.
-
To widen the gap: turn the Regulator Cap
clockwise.
-
To shorten the gap: turn the Regulator Cap
counter-clockwise.
This operation is necessary in case of Errors like “Chain Note” or “Double Note”.
