Mounting Guide
Vemcount Counter BR2300
The Vemcount counter unit is a complete traffic counting unit where the sensor and counting/
communication computer is built into one unit, that is ready to be mounted to the ceiling where counting is
needed. BR2300 can be mounted in heights from 240 cm to 1280 cm.
Your counter in this package has minimum mounting height on 240cm and max mounting height of 460cm
(If it is higher than written on the line above please contact our support team immediately
)
Mounting Guidelines
For installations where there is only one sensor needed then the placement should be in the middle of the
entrance, for two or more sensors please see the last page of the mounting guide for specific information.
Sensor should be oriented such that the LEDs are pointed towards the store interior and the
Ethernet cable is pointed towards the store exterior unless obstructions prohibit it.
Brackets should be used in plaster ceiling where screws can be securely attached into the ceiling.
If bracket are used in drop ceilings, some sort of backing (metal t-bar or plywood) must be used behind the
ceiling tile to prevent the sensor from falling out should the ceiling tile get wet or rot.
Ceiling mounting bracket
Wall mounting bracket
