Bedienungsanleitung /
Users manual
MBN GmbH, Balthasar-Schaller-Str. 3,
86316 Friedberg - Germany 46
www.proled.com
，
SETUP
– CONFIGURATION – MONOCHROME
，
In case you want to control all output channels only with one DMX channel, then you should set
monochrome setting to enable.
，
SETUP
– CONFIGURATION – OVERHEAT PROTECTION
，
Here you can enable or disable the overheat protection. Select the function with the UP-DOWN buttons and
press ENTER to save your choice.
You can leave this mode at any time without saving changes by pressing the ESC button.
Overheat protection ENABLE
: At a temperature over 80° C the device will switch off the outputs.
As soon as the device has cooled down to 75° C, the outputs are switched
on again.
