Bedienungsanleitung /
Users manual
MBN GmbH, Balthasar-Schaller-Str. 3,
86316 Friedberg - Germany 40
www.proled.com
，
MAIN MODE
– MANUAL
，
Here the current intensity values of the channels (RGBAW) are displayed. The numbers indicate the
intensities from 0 to 100.0%.
Press the ENTER button and channel red, green, or blue starts flashing. Now you can adjust the value with
the UP-DOWN buttons. By pressing the ENTER button again you can select the next channel. After the last
channel, all channels are flashing. Here you can change the values of all three channels together.
If DMX PRIORITY is activated (see: SETUP MENU
– DMX PRIORITY) these manually entered values are
overwritten by the DMX values.
You can leave this mode at any time without saving changes by pressing the ESC button.
，
MAIN MODE
– SINGLE
，
Here various standalone programs can be selected.
On the display you can see the current program number, maximum number of steps and the current step
number. “S” and “W” are meaning SPEED time (speed of colour change) and WAIT time (delay between
steps). The SPEED time indicates the changing speed from one step to the next one. The WAIT time
indicates the delay time, until the change to the next step is performed. During the WAIT time the original
channel values remain unchanged.
By pressing the ENTER button several parameters can be selected: program number, SPEED time and
WAIT time. The selected parameter flashes and can be modified with the UP-DOWN buttons.
You can leave this mode at any time without saving changes by pressing the ESC button.
If DMX PRIORITY is activated (see: SETUP MENU
– DMX PRIORITY), the current program is overwritten by
the DMX signal. As soon as the DMX signal stops, the selected program will automatically be resumed.
The standalone programs can be edited and changed with MBNLED PC-DMX/RDM Interface. The original
factory built in programs can be roll backed in SETUP
– OPTIONS – FACORY SETTINGS menu.
