Bedienungsanleitung /
Users manual
MBN GmbH, Balthasar-Schaller-Str. 3,
86316 Friedberg - Germany 38
www.proled.com
，
INPUT CONTROL MODE
– ANALOGUE 0/1-10V
，
The device works in 0/1-10V mode, if the jumper on the PCB is in correct state.
See page 34.
SETUP
–
Access to the setup menu items
0/ 1-10V
–
Channel control via analog input signal
MANUAL
–
Desired colour can be adjusted manually with the buttons
SINGLE
–
Standalone programs can be selected
，
INPUT CONTROLE MODE
– DALI
，
The device works in DALI mode, if the jumper on the PCB is in correct state.
See page 35.
SETUP
–
Access to the setup menu items
DALI
–
Channel control via DALI commands, auto addressing via DALI commands, or manual DALI
addressing
DALI addresses setting:
Press the ENTER button.
The first channel number starts to blink. With the UP-DOWN buttons you can now select the address
from 1-64. By pressing the ENTER button, the next channel number starts to blink. For every
channels should be set different channel number, other way the DALI system will not work correctly.
Press the ESC button to save the changes.
