Bedienungsanleitung /
Users manual
MBN GmbH, Balthasar-Schaller-Str. 3,
86316 Friedberg - Germany 39
www.proled.com
MANUAL
–
Desired colour can be adjusted manually with the buttons
SINGLE
–
Standalone programs can be selected
Select main mode:
With the UP-DOWN buttons the main mode is selected. On the right side a menu with the main menu items
is displayed. By pressing the UP-DOWN buttons you can select the menu items. When the item is
highlighted, the function can be activated by pressing the ENTER button. When you press the ESC button or
if no button is pressed for 10 seconds, the device will revert to the previously selected main mode.
，
MAIN MODE
– DMX ADDRESSES
，
Only in DMX mode
The three large numbers indicate the DMX address.
As long as the digits are flashing, no DMX signal is received. When the display stops flashing, a DMX signal
is present.
DMX address setting:
Press the ENTER button.
With the UP-DOWN buttons you can now select the address from 1-507. By pressing the ENTER
button once more, the slave addresses of the slave devices can be selected faster and easier. The
difference between slave device and DMX address is, that when configuring the slave devices the
DMX address is always changed in steps of 5. This is a simplification when you have to configure
many devices (e.g. in master-slave mode). One master can control up to 20 slave devices.
Press the ENTER button to save the changes. You can leave this mode at any time without saving
changes by pressing ESC button.
