MBNLED
DMX STRIP 30
www.mbnled.com
16
Figure 5 above shows a setup using input/output power boards to supply AUX power
for the strips. At the 8
th
strip the
AUX power input
is used to supply additional power
for the next strips, but between strip16 and strip17 a combination of input/output
power boards is used to supply new power. As you can see, only the DMX data lines
are connected between those strips, the additional power is supplied via the input
power board.
On the following pictures you can see some examples of right and wrong connections
between the strips.
RIGHT CONNECTION
WRONG CONNECTIONS
