MBNLED
DMX STRIP 30
www.mbnled.com
14
3. Operation of more than 8 Strips
with AUX Power Input
The figure on the left side shows the right
setup of the strips if you want to operate more
than 8 pcs in one line. In this case you MUST
connect an additional power source on the
AUX Power Input terminal at the 8
th
strip AND
you have to cut both wire bridges on the
backside of the 8
th
strip. After every 8
th
strip
you have to connect an AUX power supply.
Note: The AUX power supply can be the same
as the one you used to supply the first strip if it
has enough power (each strip needs 12W in
full bright white mode). Just you have to
consider the correct cabling.
TAKE EXTRA CARE TO THE RIGHT
CONNECTION OF THE PCBs, THE WHITE
CONNECTOR IS ALWAYS THE POWER/
DMX INPUT, THE DARK GREY IS THE
POWER/DMX OUTPUT! IF YOU CONNECT
THE STRIP WRONGY, IT CAN BE
DAMAGED!
Figure 4.
Connection of more than 8 strips
with AUX power input
