5
1. PRECAUTIONS FOR INSTALLATION AND USE
1.1 Installation
Caution
Use the optional collator table exclusively designed for this machine and do not install the machine in an
unstable place, such as one that shakes or tilts. The machine may fall, causing a damage or bodily injury.
Do not install the machine in a humid or dusty place, as excessive humidity and dust may cause fire and physical
injury.
Install this machine only by the dealer serviceman or equivalently qualified person who is specialized in this
machine in according with the procedures and method mentioned in this manual.
When installing this machine, use the optional collator table exclusively designed for this machine.
The table is equipped with safety devices, such as metal fittings
B
to prevent the machine from falling, and
it has been engineered so that, whether the machine operate alone or in combination with a post-processor
(stapler-puncher) or other options, the machine(s) will be balanced as a whole.
NOTES:
In case the collator is placed on the table or the like other than the dedicated table for the collator, be sure to install
the metal fitting A to prevent the machine from falling.
How to install metal fitting A to prevent the machine from falling
For fixing metal fitting
A
to the wall, select the sturdy and permanently stabilized place where the metal fitting A will not
come off even in case 36 lbs. power is continuously applied at upper part of the collator.
1. The collator should be placed on the steady and stable table or the like.
2. Fix the metal fitting
A
on the cover panel of the collator using four SKSW4x8 screw + washers set (supplied with the
machine).
3. Find suitable holes in the metal fitting
A
so that edge of metal fitting
A
fits right distance to the wall.
4. Fix the metal fitting
A
on the wall of the room.
Two holes of 8 mm dia. for screw are provided on the metal fitting
A
.
Use two screws (1/4” dia. x 2” long), two washers (1/4”+ dia.) and type S8 (or equivalent) screw anchors (5/16” dia. x
1-9/16” long) or larger ones depending on the material of the wall. (These wall screws, washers and screw anchors are
not supplied with the machine)
A.
B.
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
