MBM FC-10 Скачать руководство пользователя

Страница: 32 / 35

Troubles

Possible

cause

Action

Paper feed pressure is too weak.

Select stronger paper feed pressure.

Separator pressure is too strong

Select weaker separator pressure.

Empty feed occurs
frequently.

Sheets are curled at the edges
because they were copied.

Set sheets upside down on a feed table.

Paper becomes dirty.

Paper feed rubber rollers,
separators, transport belts, are dirty.

Clean the rollers, separators, and /or belts.

The stacking table is not set
properly.

Set the stacking table properly.

The machine and stacking table are
not installed at level place.

Install them at level place.

The EJECT lamp
shows.

The paper ejection area of the
machine are exposed to direct light.

Shade light with curtains or the like, or move the
machine to a darker place so that the ejection area will
not be exposed to direct light.

The paper ejection sensor
malfunctions when hands or
foreign objects enter the ejection
area while the machine is in
operation.

Make sure that foreign objects do not enter the
ejection area while the machine is in operation.

The machine and stacking table are
not installed on level place.

Install them at a level place.

The collator suddenly
runs fast.

The paper discharge parts of the
machine are exposed to direct light.

Shade light with curtains or the like, or move the
machine to a darker place so that the ejection area will
not be exposed to direct light.

Paper of different qualities are
loaded onto same feed table.

Make sure that sheets of the same quality are loaded
onto a paper feed table.

Differently printed paper is loaded
onto same feed table.

Make sure that sheets printed in the same way are
loaded onto a feed table.

The DOUBLE FEED
lamp lights even after
only one sheet of paper
has been fed.

Paper not conforming with
specifications is in use.

Use paper conforming with specifications.

Lamps for stations
repeatedly lights up
and go out while
moving up and down.

Troubles in the table lifting motor
or other electrical parts

Contact your dealer.

7.3. In case of breakdown

Should the collator need repair, contact your MBM dealer.

MyBinding.com

5500 NE Moore Court

Hillsboro, OR 97124

Toll Free: 1-800-944-4573

Local: 503-640-5920

Содержание FC-10




































Результаты поиска

Содержание FC-10

Отзывы:

Похожие инструкции для FC-10

Бренды по названию

Популярные бренды

MBM FC-10, Руководство по эксплуатации

Результаты поиска

Содержание FC-10

Отзывы:

Похожие инструкции для FC-10

Бренды по названию

Популярные бренды