EREBUS
USER MANUAL
p.
7
2.5 Other provisions
The first thing to do when starting use is to check the presence and integrity of the protections and the operation of the
safety devices. If you find any defects, do not use the pedal assisted bicycle!
FENDERS
It is therefore strictly forbidden to modify or remove the guards, controls, la-
bels and information plates.
WARNING
WARNING
IMPORTANT NOTICE:
For your safety, the seatpost reference
mark (B) should never be outside the
tube into which the seatpost is inserted.
ATTENTION
ASSEMBLY
In the event that you do not have the ap-
propriate instrumentation for adjustment
or do not have the skills, contact the au-
thorized reseller.
2.6 Unpacking and tuning
The pedal assisted bicycle is delivered fully assembled and in working condition.
2.6.1 Saddle adjustment
Adjusting the height of the saddle is an essential prerogative for the correct use of the pedal assisted bicycle. Incorrect
adjustment can generate structural breaks in the frame.
Adjust the height of the saddle by activating the quick release mechanism (Ref. A - Figure 1).
Check that the mechanism is tightened before testing the seat and using the vehicle. Do not raise the saddle beyond the
limit switch signal located in the seat post (Ref. B - Figure 1).
FIG. 1
