EREBUS
USER MANUAL
p.31
6.2.1 Control devices
Check the efficiency and state of charge of the battery. Use in a very cold environment quickly degrades battery efficien-
cy. Check the tension and lubrication of the chain.
6.2.2 Wheels
Check the inflation pressure of the tires. Check the state of wear of the tread: there must be no cuts, cracks, foreign bod-
ies, abnormal bulges, visible canvases and other damage.
ATTENTION
NEGATIVE VERIFICATION
In the event that, during the preliminary checks, defects of any kind should be found and even a single
verification is negative, DO NOT RIDE THE PEDAL-ASSISTED BICYCLE. Immediately activate all meas-
ures to carry out a proper repair and, if necessary, contact the authorized dealer or an authorized
workshop.
ATTENTION
Do not inflate tyres beyond the permissible value re-
ported by the rider on the side surface of the tyres.
6.2 Preliminary functional checks
Before each use, the driver must ensure the safety status of the pedal-assisted bicycle. Therefore, perform the following
inspections before riding the pedal-assisted bicycle.
6.2.3 Braking
Perform a visual inspection of the braking system verifying that there are no damaged cables or lubricants in the brake
and rim braking surfaces. Check the operation of the brakes with a low-speed braking test in an obstacle-free area, first
with the rear brake and then with the front brake. Test the efficiency of the braking system on a flat and low-speed route.
