3.5 Assistance system management
3.5.1 Service management commands
The pedal-assisted bicycle has, in the center of the handle-
bar, a display that allows you to manage the operation of
the electric motor, in addition to other basic functions illus-
trated below. (Figure 4)
Near the left knob of the handlebar are 3 buttons, which
can be used with a short or long press, thanks to these you
can control the functionality of the display. (Figure 5)
FIG. 4
FIG. 5
3.5.2 Turning the system on/off
To activate the system, press the "POWER" button (Ref.H - Figure 5) until the power diagram is displayed or press the "ON"
button on the battery. To turn off the display , press and hold the "POWER" button until the power off screen appears or
press the "OFF" button on the battery.
button
Short pressure/<1 second
prolonged pressure/ > 2 seconds
H-power
Allows you to:
Scroll through the Home from
one Main Screen to another;
Scroll between Home and Menus;
confirm the action during
the changes.
Allows you to:
Turn the display on and off;
from the Menu and Advanced
section, return to the last
Home screen displayed.
F-up
Allows you to scroll through menu
items, going up.
allows you to increase the level of
assistance.
from any main screen allows
you to change the mode of
operation of the lights.
G-down
allows you to scroll through menu
items, going down.
allows you to reduce the level of
assistance.
from any main screen allows
you to activate the
Walk mode
F+G
down+up
-
from the main screens,
the simultaneous press of
the two buttons, allows you
to access the menu.
EREBUS
USER MANUAL
p.12
