EREBUS
USER MANUAL
p.25
3.11.3 Battery charging
The battery of the pedal-assisted bicycle can only be recharged by removing the bat- teria.
To charge the battery proceed as follows:
1- Turn off the assistance system of the pedal-assisted bicycle using the appropriate "MODE" button (Rif. H in Figure 5);
2- Remove the battery;
3- Connect the supplied battery charger to the socket with the appropriate plug, at the bottom of the battery;
4- Connect the battery charger to a power outlet (230 V / 50 Hz) and charge the battery for as long as necessary.
ATTENTION
CHARGER
Always connect the plug to the battery first
and then the battery charger to the power
outlet.
FIG. 9
3.11.4 Troubleshooting
ATTENTION
TROUBLESHOOTING
In the event that the assistance system does
not activate even if the battery is charged,
contact your authorized dealer.
PROBLEM
CAUSE/SOLUTION
The system does not turn on
Check that the battery is charged
.
PROBLEM
CAUSE/SOLUTION
The assistance is not activated
Check that the battery charge level is
sufficient.
