background image

 

4

 

 
 
 
 

 

 

 

 

1. 

Remove the splash shield installation bolt A (2), fastener B (1) 
and bolt C (1).

 

2. 

Pull the splash shield inward and disengage the tabs 
(7 locations), and then remove the splash shield.

 

 

 
 

 

 

 

 

 

 
 

 

3. 

Cut off the splash shield shown in the figure using nipper 
(2 locations).

 

 
 
 
 
 
 
 
 
 
 
 
 

4. 

Align the rear bumper holes, and install the kit clip nuts (3).

 

 
 
 
 
 
 
 

3

MUD FLAP (REAR) INSTALLATION

• 

The removed bolt A (2), fastener B (1) and bolt C (1) are to
be reused. Be careful not to damage or lose them

 

 

CAUTION

• 

The figure shows the left side, however, perform the same procedure for the right side.

 

 

NOTE

 

 

 

Bolt A 

Bolt C 

Fastener B 

Splash shield 

Splash shield 

Tab

 

 

 

Splash shield 

Cut out 

 

 

Rear bumper 

Clip nut 

Отзывы: