Mazda Mazda 6 Скачать руководство пользователя страница 694

Страница: 694 / 762

7–46

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Signal

Warning

Action to be taken

Smart Brake Support/Smart

City Brake Support (SBS/

SCBS) Warning Light

The light turns on if the windscreen or

the radar sensor are dirty, or there is a

malfunction in the system.

Verify the reason why the warning light

is illuminated on the centre display.

If the reason why the warning

light is illuminated is due to a dirty

windscreen, clean the windscreen.

If the warning light is illuminated

because of a dirty radar sensor, clean

the front emblem.

For any other reasons, have the vehicle

inspected at an expert repairer, we

recommend an Authorised Mazda

Repairer.

Low Fuel Warning Indication/

Warning Light

The light turns on when the remaining

fuel is about 9.0 L (2.3 US gal, 1.9

Imp gal).

NOTE

The light illumination timing may

vary because fuel inside the fuel

tank moves around according to the

driving conditions and the vehicle

posture.

Add fuel.

120km/h Warning Light

The 120 km/h warning light illuminates

when the vehicle speed exceeds 120

km/h.

Lower the vehicle speed.

/C\FCA(-''(A'FKVKQPKPFD

Содержание Mazda 6



























































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Mazda 6

Отзывы:

Похожие инструкции для Mazda 6

Бренды по названию

Популярные бренды

Mazda Mazda 6, Руководство пользователя

Результаты поиска

Содержание Mazda 6

Отзывы:

Похожие инструкции для Mazda 6

Бренды по названию

Популярные бренды