■
Installation instructions (For MX-5 only)
MX-5
－
2
Lower panel removal
1. Pull the top side of the lower panel outward, and then
remove clips A (2 locations) and tab B (1 location).
2. Remove tabs C (2 locations), then remove the lower panel.
3. Remove the screws (4), then remove the knee bolster.
(If equipped)
Side wall removal
1. Pull the side wall outward, detach clips A (2 locations), clips
B (4 locations), the pin C (1 location), and tab D (1 location),
and then remove the side wall.
Center panel module removal
1. Shift a shift lever to the R position or a selector lever to the D
range.
2. Remove the bolt (1 location).
3. Remove the screws (2 locations).
4. Pull the center panel module outward, then remove clips
A (4 locations).
5. Remove the air conditioner side connector.
6. Pull the center panel module further outward and cut off
the tape binding the antenna and vehicle side wiring
harness.
7. Remove the audio side connectors (2 locations), the antenna
feeder (1 location), and then remove the center panel module.
Pin C
A
C
B
Side wall
Clips B
Tab D
A
B
B
D
B
Clips A
Tab B
A
A
C
B
C
Lower panel
Clips A
Tabs C
Screws
Knee bolster
(2 Locations)
Screws
(2 Locations)
Antenna
feeder
A
Screw
A
A
A
Clips A
Center panel module
Screw
Bolt
Audio side
connectors
Air conditioner
side connector
Do not apply excessive force when pulling out the center
panel; otherwise it could cause an open circuit.
CAUTION