Common-2
PARTS LIST
z
iPod integration module （
Part No. C9F2 V6 572 EU
）
Parts Part
Name
Qty
Parts Part Name
Qty
Parts
Part Name
Qty
iPod
Integration
module
1
Harness (c)
1
iPod
connection
cable
1
Tie wrap
Large 300 mm
Small 100 mm
L 7
S 10
Double-sided
adhesive tape
（
44
×
118mm
）
2
Pad protector
（
50
×
100 mm
）
10
※
A separately purchased "Selector box" (TD13 79 CFZ) is necessary when installing the iPod integration module
to vehicles equipped with an AUX terminal.
☆
Flathead screwdriver
☆
Socket wrench
☆
Pliers
☆
Soft cloth
☆
Phillips screwdriver
☆
Cutter knife
☆
Scissors
☆
Vinyl tape
☆
Fastener remover
☆
Mat
2. REQUIRED TOOLS
•
Before installation, verify that the kit includes all the following parts and that they are free of dirt, scratches,
or damage.
NOTE:
1. PARTS
3. BEFORE INSTALLATION
•
To prevent short related accidents while performing procedures, disconnect the negative battery cable
before beginning any work.
•
When disconnecting the connector, hold the connector itself to remove while pressing the connector lock.
•
Do not apply excessive force to the wiring harness as it could cause an open circuit.
•
When locking connectors, listen for a click that will indicate they are securely locked.
•
Be careful not to pinch the wiring harness. Otherwise, the wiring harness could be damaged.
•
When removing and installing vehicle parts, make sure they are clean with no scratches. Also, be sure to
cover the vehicle body with protectors or mats when removing/installing parts to prevent scratches and dirt.
CAUTION
•
Refer to the applicable Workshop Manual for removal and installation of vehicle parts. Not following the
procedures for removal/installation in the Workshop Manual could result in an accident or vehicle
malfunction.
•
When the negative battery cable is removed, the clock, radio, trip meters and other memories will be erased.
Before performing work, record the content of the memory.
NOTE:
