■
Installation instructions (For Mazda3 only)
Mazda3
－
6
WIRING <Installation of iPod integration module and selector box>
(For vehicles with AUX terminal)
z
To prevent an open or short circuit in the wiring of the iPod integration module, be sure to route cables
avoiding sharp edges and burrs on the vehicle's sheet metal.
z
To ensure proper adhesion, be sure to degrease the area where the double-sided adhesive tape is to be
adhered.
z
After fixing a cable with a tie wrap, cut off excess tie wrap using nippers. Otherwise it may interfere with
other parts causing malfunction or noise.
CAUTION
Selector box
iPod integration module
Harness (a)
(To audio unit)
Harness (b)
(To AUX terminal)
Vehicle harness
Harness (a) (Connect to audio unit)
Vehicle
front
○
A
AUX connector
(16P)
Harness(b)
(Route harness so that this part is approx. 170 mm)
Approx. 170mm
Press the cable into the
back and secure cable
iPod integration module
Selector box
○
A
To AUX
terminal
Vehicle front
○
C
Vehicle front
Put iPod connection cable in glove box
(Cable 30 cm from instrument panel)
Remove connector cover when connecting iPod;
fit connector cover when iPod is not used
Pad protector
(Attach to edge)
Tie redundant part
Tie wrap (small)
○
A
To
audio unit
Selector box
Vehicle
front
iPod integration module
Tie wrap (large)
○
C
