Mazda 2007 CX-9, Особенности сервиса

Страница: 432 / 614

SECURITY AND LOCKS [ADVANCED KEYLESS SYSTEM]
09-14A–14
IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND CLEARING OUTLINE
[ADVANCED KEYLESS SYSTEM]
id0914b1102300
•
When performing the following procedures, the immobilizer resetting procedure using the Mazda Modular
Diagnostic System (M-MDS) must also always be performed: “Keyless control module replacement”, “PCM
replacement”, “Keyless control module and PCM joint replacement”, “Key ID number clearing”. The engine will
not start unless all work is performed using the Mazda Modular Diagnostic System (M-MDS).
•
When replacing any of the immobilizer system component parts, adding/erasing keys or performing other
functions, refer to the following table. For repair procedures, refer to the Workshop Manual Section 09-14.
Situation
Items neccesary to
perform procedure
(always have these
ready before beginning
the procedure)
Cautionary notes
Making a spare key when the customer has
two or more keys that can start the engine.
Or registering an additional key.
•
Keys for registration
•
If “Customer Spare Key Programming Disable”
has previously been performed using the Mazda
Modular Diagnostic System (M-MDS), the
Mazda Modular Diagnostic System (M-MDS)
must be used to register an additional key.
Making a spare key when the customer has
one key that can start the engine or no keys.
Or registering an additional key.
•
Keys for registration
•
Mazda Modular
Diagnostic System
(M-MDS)
−
Clearing previously registered key ID
numbers.
•
Keys for registration
(two or more keys)
•
Mazda Modular
Diagnostic System
(M-MDS)
•
All key ID numbers registered in the vehicle are
cleared.
•
Unless keys are re-registered after clearing the
key ID numbers, the engine cannot be started.
Before beginning the procedure, verify that the
customer has turned in all of the keys for the
vehicle.
•
Unless two or more keys are registered after
clearing the key ID numbers, the engine cannot
be started.
•
The keys (two or more keys) readied before
beginning the procedure do not have to be new
keys. Any key that is capable of starting the
engine before beginning the procedure can be
used.
Replacing all keys. (When replacing the
steering lock or similar procedure)
•
New keys (two or
more keys)
•
Mazda Modular
Diagnostic System
(M-MDS)
•
Since the steering lock is replaced, keys used
before replacement become unusable. Have two
new keys or more ready before beginning the
procedure.
•
Unless keys are registered after replacing the
steering lock, the engine cannot be started.
Changing the method for registering
additional keys. (Method for registering other
keys using two keys that can start the engine
is disabled.)
•
Mazda Modular
Diagnostic System
(M-MDS)
•
After performing this procedure, additional keys
can only be registered using the Mazda Modular
Diagnostic System (M-MDS).
•
The setting can be changed to the original using
the Mazda Modular Diagnostic System (M-
MDS).
Changing the method for registering
additional keys. (Method for registering other
keys using two keys that can start the engine
is enabled.)
•
Mazda Modular
Diagnostic System
(M-MDS)
•
This is the default setting on new vehicles.
Replacing the keyless control module only.
•
New keyless control
module
•
Keys for registration
(two or more keys)
•
Mazda Modular
Diagnostic System
(M-MDS)
•
Unless keys are re-registered after replacement,
the engine cannot be started. Before beginning
the procedure, verify that the customer has
turned in all of the keys for the vehicle.
•
Unless two or more keys are registered after
replacement, the engine cannot be started.
•
The keys (two or more keys) readied before
beginning the procedure do not have to be new
keys. Any key that is capable of starting the
engine before beginning the procedure can be
used.
3423-1U-06H(09-14A).fm 14 ページ ２００６年１１月２１日 火曜日 午後５時３９分