Mazda 2007 CX-9, Особенности сервиса, Страница: 231 / 614

ON-BOARD DIAGNOSTIC [AW6A-EL, AW6AX-EL]
05-02–9
05-02
P1919
Engine coolant
temperature signal error
•
If the engine coolant temperature
signal from the PCM, which is
transmitted using the CAN
communication, is invalid and the
condition has continued for
500 ms or
more .
•
inhibits TCC, slip control
•
Fixes the engine coolant
temperature signal at
80
°
C {176
°
F}
Enabled
P2544
Engine torque signal error
(invalid signal)
•
If the engine torque signal or engine
torque-loss signal from the PCM,
which is transmitted using the CAN
communication, is invalid and the
condition has continued for
500 ms or
more .
•
Emergency mode 1
•
Fixes the engine torque
signal at the maximum Enabled
P2757
Torque converter clutch
(TCC) (stuck off)
•
Difference of 100 rpm or more
between engine and counter drive
gear (output) speeds is detected
when driving in D range, engine
speed is
less than 400 rpm , TCC
control solenoid is on, and ATF
temperature is
20
°
C {68
°
F} .
•
Inhibits self learning
control
•
Inhibits TCC control
•
Inhibits TCC, slip control
Disabled
P2758
Torque converter clutch
(TCC) (stuck on)
•
Difference of less than 30 rpm
between engine and turbine speeds is
detected when driving in D range,
engine speed is
within 1,000—3,000
rpm , TCC control solenoid is off, and
ATF temperature is 20
°
C {68
°
F} .
•
Inhibits self learning
control
•
Inhibits TCC control
•
Inhibits TCC, slip control
•
Inhibits driver adaptive
shift control
•
Engine stall avoidance
control (Engine braking is
applied in 1GR when
driving in D range, turbine
speed is less than 1,000
rpm, and counter drive
gear (output) speed is less
than 420 rpm.)
Disabled
P2762
TCC control solenoid
range/performance (stuck)
•
Feedback current corresponding to
solenoid current command value is
irregular when engine is running.
•
Emergency mode 1 Disabled
P2763
TCC control solenoid
circuit malfunction (short to
power)
•
Short circuit in TCC control solenoid
signal system (when TCM monitors
solenoid output voltage, voltage that
differs from signal output by CPU in
TCM is detected).
•
Inhibits self learning
control
•
Inhibits TCC control
•
Inhibits TCC, slip control
•
Inhibits driver adaptive
shift control
•
Engine stall avoidance
control (Engine braking is
applied in 1GR when
driving in D range, turbine
speed is less than 1,000
rpm, and counter drive
gear (output) is less than
420 rpm.)
Disabled
P2764
TCC control solenoid
circuit malfunction (short to
ground/open circuit)
•
Open or short circuit in TCC control
solenoid signal system (when TCM
monitors solenoid output voltage,
voltage that differs from signal output
by CPU in TCM is detected).
•
Inhibits TCC control
•
Inhibits TCC, slip control
•
Inhibits driver adaptive
shift control
Disabled
DTC
No.
On-board diagnostic
function
Detection condition Fail-safe TCC
3423-1U-06H(05-02).fm 9 ページ ２００６年１１月２１日 火曜日 午後５時１６分