MAZDA5
㧙
19
INSTALLING DLP UNIT
1. Remove the bushes (4 locations), brackets (2 locations),
washers (4 locations), and screws (4 locations) from the
DLP unit.
2. Affix the pad protectors to the DLP unit as shown in the
figure.
3. Affix the double-sided adhesive tape to the DLP unit
shown in the figure.
4. Install the DLP unit to the dashboard member.
5. Connect the two tie wraps (large) and secure the DLP
unit to the dashboard member.
6
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
x
To ensure proper affixing, be sure to degrease the
area where the double-sided adhesive tape is affixed.
CAUTION
Double-sided adhesive tape
DLP unit
Double-sided adhesive tape
(Cut tape and adhere)
㩷
Pad protector
DLP unit
Pad protector 1/2
㬍
4
DLP unit
Bracket
Bush
Washer
Screw
Bracket
Bush
Washer
Screw
x
The brackets are not used with the installation of this
accessory.
Note
x
Make sure there is clearance from the DLP to the
glove box and glove box tab in area A.
Note
DLP unit
Dashboard member
Vehicle front
Tie wraps (large) x2
A
