MAZDA5
㧙
26
INSTALLING iPod INTEGRATION MODULE
1. Affix the pad protector halves to the iPod integration
module as shown in the figure.
2. Wrap the vehicle wiring harness with a pad protector.
3. Cut half of a pad protector longitudinally, wrap the vehicle
wiring harness with the protector, and secure the harness
using a tie wrap (large).
4. Affix the iPod integration module to the instrument panel
from the passenger side.
5. Connect two tie wraps (large) and secure the iPod
integration module to the vehicle wiring harness.
8
x
When installing Sirius only, begin with Step 1 on page 30.
NOTE
Pad protector (1/2)
iPod integration module
Pad protector (1/2)
㩷
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
Vehicle wiring harness
Pad protector
Pad protector (1/2) x2
(Cut longitudinally)
Tie wrap (large)
Vehicle front
x
Always attach the lower surface of the iPod integration
module to the upper surface of the pad protector,
which has been cut in half longitudinally, and secure it
with a tie wrap (large). Otherwise, the iPod integration
module may fall down.
CAUTION
Vehicle wiring harness
iPod integration module
Tie wraps (large) x2
Vehicle front
