MAZDA5
㧙
31
6. Branch connect the +B wire to the audio 24-pin
connector (terminal B) using the electro tap.
7. Branch connect the ACC wire to the audio 24-pin
connector (terminal R) using the electro tap.
Audio 24 pin connector (Vehicle wire)
Kit
㩷
wire
㩷
Terminal B
+B
㩷
Terminal R
ACC
㩷
8. Wrap the electro taps and vehicle wiring harness
together using urethane.
9. Secure the harness (H5) +B, ACC wires to the vehicle
wiring harness with tie wraps (small).
10. Route a tie wrap (small) to the tie wrap (large) used for
securing the DLP unit, route the harness (H5) as shown
in the figure, and secure it.
Urethane
Tie wraps (small)
Terminal B: +B
Kit wire: +B
Terminal R: ACC
Kit wire: ACC
R
B
[Audio 24 pin connector ]
(View from wire side of connector)
Vehicle wiring harness
Electro-taps
Harness (H5)
(+B, ACC wires)
Vehicle front
x
When reinstalling the audio unit, always secure it
using a tie wrap (small). Otherwise, the harness (H5)
may get caught.
㩷
CAUTION
Harness (H5)
Tie wrap (large)
Harness (H5)
(+B, ACC wires)
Tie wrap (small)
Vehicle front
