Maytag MGD9000Y, Инструкция по использованию и уходу

Страница: 11 / 40

11
5.
Set any cycle settings
The default cycle settings will be displayed on the LCD screen.
You may adjust different settings, depending on whether you
have selected a Sensor Cycle, Timed Cycle, or Steam Cycle.
See the “Cycle Guide” for detailed information.
NOTe: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Sensor Cycles:
You can select a different dryness level, depending on your
load, by pressing the button for More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
Sensor cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Timed Cycles:
When you select a Timed Cycle, the default time is displayed.
Use the LCD control buttons to increase or decrease the time
in 1 minute increments. Press and hold to change the time in 5
minute increments.
The default temperature may be changed by using the
LCD control buttons to select the desired dry temperature.
4.
Select the desired cycle
Select the desired cycle for your load. See the “Cycle Guide”
or the display for more information about each cycle.
If selecting Timed Dry, use the LCD control buttons to adjust
the length of the cycle.
Changing the Sensor Cycle settings
to increase drying time
If all your loads on all Sensor Cycles are consistently not
as dry as you would like or are too dry, you may change the
default settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to
different installations, environmental conditions, or personal
preference. This change is saved in memory and will affect
all of your Sensor cycles, not just the current cycle/load.
1. Before starting a Sensor cycle, press and hold the
LCD control button for Dryness Level for 6 seconds.
The LCD will briefly display the regular Dryness
Level options, then change to show the default
setting options.
2.
Press the LCD control button for the desired setting.
3. Press the BACK button to return to the main screen for
the selected cycle.
There are 5 drying settings:
Much damper clothes, 30% less drying time.
Slightly damper clothes, 15% less drying time.
Factory preset dryness level.
Slightly drier clothes, 15% more drying time.
Much drier clothes, 30% more drying time.
To change the drying settings:
NOTe:
The settings cannot be changed while the dryer
is running or paused. The dryer must be in standby mode
(the power button is off) to adjust the default settings.
Steam Cycles:
Auto refresh with Steam:
Reduces odors and light wrinkles from small to medium-sized
loads of dry items. Dry time will automatically adjust when the
load size is sensed. Temperature is selectable.
Custom refresh with Steam:
The cycle time defaults to 15 minutes. For larger loads, you may
add additional time up to 50 minutes, in 5 minute increments,
using the LCD control buttons.