B – 8
16026784
© 2005 Maytag Services
Use and Care Guide
6
Surface Cooking
When a control is turned on, a glow can be seen through the
smoothtop surface.
The element will cycle on and off to
maintain the preset heat setting, even on Hi.
For more information on cookware, refer to Cookware
Recommendations on page 7 and “Cooking Made Simple”
booklet included with your range.
WARMING CENTER
DUAL ELEMENT
(SELECT MODELS)
FLEX-CHOICE
TM
ELEMENT
SINGLE
ELEMENT
Tips to Protect the
Smoothtop Surface
Cleaning
(see page 19 for more information)
• Before first use, clean the cooktop.
• Clean your cooktop daily or after each use. This will keep
your cooktop looking good and can prevent damage.
• If a spillover occurs while cooking, immediately clean the
spill from the cooking area while it is hot to prevent a tough
cleaning chore later. Using extreme care, wipe spill with a
clean dry towel.
• Do not allow spills to remain on the cooking area or the
cooktop trim for a long period of time.
•
Never
use abrasive cleansing powders or scouring pads
which will scratch the cooktop.
•
Never
use chlorine bleach, ammonia or other cleansers not
specifically recommended for use on glass-ceramic.
Hot Surface Light
The Hot Surface indicator light is located on
the control panel. The light will be illuminated
when any cooking area is hot. It will remain
on, even after the control is turned off, until the area has
cooled.
To Prevent Marks and Scratches
• Do not use glass pans. They may scratch the surface.
•
Never
place a trivet or wok ring between the surface and
pan. These items can mark or etch the top.
• Do not slide aluminum pans across a hot surface. The pans
may leave marks which need to be removed promptly. (See
Cleaning, page 19.)
• Make sure the surface and the pan bottom are clean before
turning on to prevent scratches.
• To prevent scratching or damage to the glass-ceramic top,
do not leave sugar, salt or fats on the cooking area. Wipe
the cooktop surface with a clean cloth or paper towel
before using.
•
Never
slide heavy metal pans across the surface since
these may scratch.
To Prevent Stains
• Never
use a soiled dish cloth or sponge to clean the
cooktop surface. A film will remain which may cause stains
on the cooking surface after the area is heated.
• Continuously cooking on a soiled surface may/will result in
a permanent stain.
To Prevent Other Damage
• Do not allow plastic, sugar or foods with high sugar content
to melt onto the hot cooktop. Should this happen, clean
immediately. (See Cleaning, page 19.)
•
Never
let a pan boil dry as this will damage the surface and
pan.
•
Never
use cooktop as a work surface or cutting board.
•
Never
cook food directly on the surface.
• Do not use a small pan on a large element. Not only does
this waste energy, but it can also result in spillovers burning
onto the cooking area which requires extra cleaning.
• Do not use non-flat specialty items that are oversized or
uneven such as round bottom woks, rippled bottom and/or
oversized canners and griddles.
• Do not use foil or foil-type containers. Foil may melt onto
the glass. If metal melts on the cooktop, do not use. Call an
authorized Maytag Servicer.
Содержание MER5551BA - 30'' Electric Range
Страница 25: ...2005 Maytag Services 16026784 A 1 Appendix A...
