6-1
07/02
Commercial
Multi-Load
Dryers
Models
MDG30MC2
MDG30PC2
MDG30PNA
MDG30MNA
PRODUCT SPECIFICATIONS
• Drive motor: 1/2 H.P. (.373 Kw)
• Air flow: 600 cubic feet (17 cubic meters) per minute.
• Amperage Draw: 9.8 amps (approximate).
• Heat source: 90,000 BTU/Hr. (22,680 kcal/hr.).
• Flush to side wall installation possible, 24" rear clearance suggested for ease of maintenance.
• Tumbler Capacity: 12.3 cu. ft. (.348 cu.m.)
• Tumbler Diameter: 30" (76.2 cm)
• Tumbler Depth: 30" (76.2 cm)
• Door Opening: 21 1/2" Dia. (54.61 cm)
• Weight: Crated: 550 lbs. (250 Kg)
Uncrated: 500 lbs. (227 Kg)
• Gas Inlet 1/2" I.D.
ELECTRICAL REQUIREMENTS
• 120 volts, 60 Hz single phase, (some 240 volts, 50 Hz models available for export).
• Individual branch circuit serving only the dryer is recommended.
• Minimum wire size required, awg. 12 with a 20 amp fuse or comparable circuit breaker. Copper
wire only.
• Dryer must be installed and grounded in accordance with National Electrical Codes and local
codes and ordinances.
PRODUCT DIMENSIONS
COMMERCIAL MULTI LOAD DRYERS - MDG30, MC2, PC2, PNA, and MNA
6"
15.2 cm
11 1/2"
29.2 cm
8"
20.3 cm
EXHAUST
DIAMETER
6"
15.2 cm
20 1/4"
51.4 cm
62 1/2"
158.8 cm
63"
160 cm
72"
182.9 cm
GAS INLET
ELECTRICAL CONN.
REAR VIEW
TOP VIEW
43"
109.2 CM
31 3/8"
79.7 cm
