11
Check Operation of Oven Broil Burner
1.
Press BROIL for the upper oven. “BROIL” scrolls down in
the upper text display area, and 550°F is displayed. After
3 seconds, “Set temp” scrolls in the upper oven text display
area, followed by “Push START.”
2.
Press START. “Broiling” scrolls in the upper oven text display
area and remains there until the set temperature is reached.
The igniter used to light the broil burner will glow. Once the
igniter is hot, the oven burner should light. Under certain
conditions, it may take up to 60 seconds for it to light.
If burners do not light properly:
■
Press OFF/CANCEL to turn off the oven.
■
Check that the range is plugged in and circuit breaker has
not tripped or the household fuse has not blown.
■
Check that the gas shut-off valve is set to the open position.
Repeat start-up. If burner does not light, press OFF/CANCEL to
turn off the oven and contact your dealer or authorized service
company for assistance.
Complete Installation
1.
Check that all parts are now installed. If there is an extra
part, go back through the steps to see which step was
skipped.
2.
Check that you have all of your tools.
3.
Dispose of/recycle all packaging materials.
4.
Check that the range is level. See the “Level Range” section.
5.
Use a mild solution of liquid household cleaner and warm
water to remove waxy residue caused by shipping material.
Dry thoroughly with a soft cloth. For more information, read
the “Range Care” section of the Use and Care Guide.
6.
Read the range Use and Care Guide or User Instructions.
7.
Turn power on. Turn on surface elements and oven. See
the Use and Care Guide for specific instruction on range
operation.
If range does not operate, check the following:
■
Household fuse is intact and tight; or circuit breaker has
not tripped.
■
Range is plugged into a grounded outlet.
■
Electrical supply is connected.
■
See the “Troubleshooting” section in the Use and Care Guide.
8.
When the range has been on for 5 minutes, check for heat.
If the range is cold, turn off the range and check that the gas
supply line shut-off valve is open.
■
If the gas supply line shut-off valve is closed, open it,
then repeat the 5-minute test as outlined above.
■
If the gas supply line shut-off valve is open, press the
Cancel button on the oven control panel and contact a
qualified technician.
If you need Assistance or Service:
Please reference the "Warranty" section of the Use and Care
Guide or User Instructions.
