Page 4 of 34
REMOVAL OF EXISTING DRINK TRAY FROM DN55## VENDER.
1.) Start with a DN55##/DM35## UL listed Vending Machine that is currently operating normally as
factory produced.
2.) Unplug the vender from the electrical outlet.
Wire Harness Clips (2)
Only included with a
new vend sensor.
18909040
Jumper Harness
804,923,21x.x1
EPROM
804,923,93x.x1
Segmented Door
Assembly Screws (4)
900,303,09x.x1
Cabinet Quick Connect Harness
(804,923,15x.x1) for new Vend
Sensor and 8-32 x ½ self drilling
screws with washer (6). Only
included in the Tray kits ordered
with a new vend sensor.
Hardware Kit 801,516,89x.x1
Figure 2
Figure 4
Figure 3
