Page 9 of 34
10.) Remove the Tray with Harness. Note: Be sure to clear tray above rear supports when removing.
Note: If the Tray is difficult to remove, the tray mounting screws on the lower trays can be
loosened to ease removal
.
CAUTION! TRAY WEIGHS APPROXIMATELY 30 LBS.
INSTALLATION OF AN ENTRAY TRAY:
11.) Place the Entray Frame Assembly (645,070,00x.x3) into the vender so that it rests on all four tray
supports.
USE CARE NOT TO PINCH, PULL OR CHAFE THE FRAME WIRE HARNESS/CONNECTOR
(See Figures 16 Thru 19).
Tray Frame
Frame Harness
Figure 15
Figure 16
