Testing Procedures
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless
testing requires it.
©2003 Maytag Appliances Company
16022506
21
Illustration Component
Test
Procedure
Results
UH2 Controlled
Oven temperature
adjustment
Press SETUP pad.
Press DOWN ARROW to scroll down
to TEMP ADJUST.
Select oven and enter desired
temperature change. Press ENTER
pad to accept the change.
Oven can be adjusted from -35 to +35
degrees inputting 5 or 35 degrees by
pressing +/- pad. To avoid over
adjusting the oven, move temperature
5 degrees each time. Wait 4 seconds
for the data entry timer to expire to
accept the change.
While increasing or decreasing oven
temperature, this does not affect broiling
or self-cleaning temperature.
The oven offset does not need to be
readjusted if there is a power failure.
Temperature adjustment will be retained
even through a power failure
.
UH2 Controlled
Temperature display
Press SETUP pad and use the arrow
pad to scroll to the next screen. Select
C/F, then select SET. Press SETUP
pad to exit.
This mode enables the user to indicate
°
F or
°
C on the display.
UH2 Controlled
Clock Display
Press SETUP pad. Press CLOCK
pad. Press TIME and enter numeric
from key pad. Select AM or PM.
Press SETUP to end. Press SETUP
pad. Press CLOCK pad. Press DAY
pad. Press back forward to select day
of week. Press SETUP to end. Press
SETUP pad. Press CLOCK pad.
Scroll down to 12/24 HR. Scroll down
to 12/24 HR format. Select SET to
activate. Press SETUP pad to exit.
Press DOWN ARROW pad to scroll
to CLOCK.
Set clock, day of week, or 12/24 HR
clock.
UH2 Controlled
12 Hour Shutoff
Press SETUP pad. Press DOWN
ARROW pad to scroll to 12 HOUR
SHUTOFF pad. Select ON or OFF.
Select SET pad to activate. Press
SETUP pad to exit.
Allows the time on the clock to be
toggled from 12 hour or 24 hour display.
UH2 Controlled
Demo mode
Press SETUP pad. Press DOWN
ARROW pad to scroll to DEMO pad.
Select DEMO to activate. Press
SETUP pad to exit.
Control will automatically cancel any
cooking operation and remove all relay
drives 12 hours after the last pad touch.
UH2 Controlled
Energy Saver
Press SETUP pad. Press DOWN
ARROW pad to scroll to ENERGY
SAVER pad. Select ON or OFF.
Select SET pad to activate. Press
SETUP pad to exit.
To save energy, the display will turn off
after five minutes of no use in time of day
mode only.
UH2 Controlled
208/240 V mode
Press SETUP pad. Press DOWN
ARROW pad to scroll to 208/240 V
pad. Select 208 or 240. Select SET
pad to activate.
For improved results when using Radiant
Bake only, the oven can be set from 240
V to 208 V.
UH2 Controlled
Control Lockout
Press and hold BACK and ENTER
pads for 5 seconds.
To reactivate the control, press and
hold BACK and ENTER pads for 5
seconds.
This is a safety feature that can be used
to prevent accidentally programming the
oven. It disables the electronic oven
control and locks the cavity door(s).
Control lockout features must be reset
after a power failure.
UH2 Controlled
Sabbath Mode
The time of day and
day of week must be
set correctly for this
feature to be
activated.
Press SETUP pad. Press DOWN
ARROW pad. Press SABBATH pad to
activate Sabbath mode.
Select AUTO or MANUAL pad. If
AUTO selected, press continue. If
MANUAL selected, press ON or OFF.
Select SET pad.
Auto-Sabbath mode will display a
reminder at 2:00 PM on Friday.
Manual-Sabbath mode will be instantly
programmed for 72 hours.
This mode disables the normal 12 hour
energy saving mode.
