4
The device can be charged in two ways:
•
Using the cigar accessory car adaptor
–
First connect the accessory cable provided to the vehicle accessory socket,
then connect the other end to the 15V 1A input indicated within the diagram on page 4.
•
Via USB
–
Connect the USB cable to a type 1 USB 5VDC source, such as a computer or mobile phone charger, then
connect the other end to the USB 5V input port indicated within the diagram on page 4.
JUMP STARTING VEHICLES
ALWAYS CONSULT YOUR VEHICLE MANUFACTURERS HANDBOOK TO CONFIRM CORRECT JUMP-STARTING ROUTINE!
Note: The battery within the device must be at a minimum of 75% for the jump start function to operate. Ensure all
non-essential loads (fan, lights, radio etc.) are switched off prior to commencing the jump starting procedure.
•
Connect the smart jump cable to the device.
•
Connect the red (+ve) clamp to the desi12VDC connection point or positive post of the battery, then
connect the black (-ve) clamp to the vehicle chassis or negative battery post.
Upon initial connection, the device will analyze the condition and voltage of the vehicle battery unto which it is
connected to determine if a jump start would be successful. The ability of the device to successfully start a vehicle is
heavily dependent upon the condition of the primary vehicle battery; if the vehicle battery is very old, has been
discharged for an extended period of time or otherwise damaged jump starting may not be successful.
6
