1
CONTENTS
GET READY
SET-UP
PLAY
Open one of each color packet with safety scissors. Pour each color packet into a separate bowl. To save time, prepare all the colors you wish to use at the same time.
Fill each bowl with bottled or distilled water. To keep fresh longer, add a small pinch of salt.
2
3
Leave to soak for four hours, or overnight.
Once Orbeez have reached full size, drain off remaining water.
Do NOT allow grown ORBEEZ to go down the drain.
1
1A
1A
1B
1C
1B
2
Close the INNER BODY (one time assembly).
Close the OUTER BODY.
FOR INSTRUCTIONAL VIDEO “HOW TO” & “DESIGN IDEAS”, GO TO ORBEEZONE.COM
Insert the closed BODY into the FEET.
1
2
Fill CRUSH TUBE with ORBEEZ. Insert CARTRIDGE into CRUSH TUBE.
Push down, forcing the ORBEEZ into the CARTRIDGE.
Remove the CARTRIDGE from the CRUSH TUBE.
Screw the NOZZLE onto the CARTRIDGE.
3
4
5
Insert the PLUNGER into the CARTRIDGE. Attach
the NOZZLE to the FILL HOLE at the top of the BODY.
Press the PLUNGER down to insert
the crushed ORBEEZ into the BODY.
Remove the CARTRIDGE & PLUNGER.
Repeat the entire process for each color you with to inject into the BODY.
NOTE:
Approximately 3-4 FULL CARTRIDGES of crushed ORBEEZ
will fill the BODY.
BODY (2)
NOZZLE
CRUSH TUBE
CARTRIDGE
CRUSHED ORBEEZ
FEET (2)
PLUNGER
EYES: REUSABLE STATIC CLING SHEET
ORBEEZ SEEDS:
8 BAGS (FOUR COLORS)
EARS & ARMS (2 EACH); HAT; HORN;
TAIL; BINOCULARS & COMPASS
EARS & ARMS (2 EACH); HEADDRESS;
TRUNK; TAIL; CAMERA & CANTEEN
Design Suggestion:
Body shown filled
with multiple colors
INNER BODY CLOSED
INNER BODY
INNER BODY
OUTER BODY
OUTER BODY
