Stand 40-081
English
page 7 of 9
Storage / dismounting
1.
Lift the parasol from the anchor tube.
2.
Remove the upper anchor tube completely.
3.
Screw threaded pins into the bore holes flush with the plate (see fig.)
The thread may get damaged.
Without cover plate, dirty water or sand may be washed into the flanks of the
thread. As sand is harder than steel, the thread may get damaged when the
screw is turned.
Screw in the threaded pins flush with the plate.
4.
In case you have two or more parasols, each parasol and its corresponding accessories
should be marked during dismounting (with punch marking or waterproof marker, e.g. for
winter storage).
Marking saves a lot of time and helps to keep things in order.
If clearly marked, each sunshade can easily be assigned to its proper location
and re-erected parallel to the wall of the house or next to the others.
For clear and easy later assignment use the same number to mark the centre
pole, the anchor tube and the ground tube. For example, for sunshade No. 1,
all three parts should carry number 1, all three parts of sunshade No. 2
should be marked with a 2, etc.
5.
Lubricate the screws on a regular basis to prevent rust.
Caution
threaded pins M16
Tip
