EN
24
The device switches off.
The grinding material is unsuitable for the device.
►
Carefully remove the grinding material and
clean the device (see the “Cleaning and Stor-
age” chapter).
The device is overloaded because something has
become caught in the blades.
►
Remove some of the contents or carefully re-
move the blockage.
The device is overloaded because it was switched on
for too long without a break.
►
Pull out the mains plug (
5
) and allow the device
to cool down for a few minutes.
DISPOSAL
Dispose of the packaging material in an
environmentally friendly manner so that it can
be recycled.
This device is governed by the European
Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE). Do not dispose
of this device as normal domestic waste, but
rather in an environmentally friendly manner
via an officially approved waste disposal
company.
TECHNICAL DATA
Article number:
09979
Model number:
HB-150
Voltage supply:
220 – 240 V~ 50 - 60 Hz
Power:
max. 150 W
Protection class:
II
ID of operating
instructions:
Z 09979 M DS V1 0620 md
All rights reserved.