EN
22
■
Before removing the lid, switch off the device and
wait until the blades have come to a standstill.
■
Do not overload the device. Fill it with no more
than 50 g.
■
The device is not suitable for constant operation.
Operate for no more than 20 seconds without a
break to prevent the motor from overheating and
the loss of coffee flavour.
1. Unwind the connecting cable from the cable
winder (
7
), insert it into the slot (
6
) on the bottom
of the device and connect to a plug socket.
2. Twist the lid (
1
) anticlockwise and take it off.
3. Pour coffee beans into the grinding compart-
ment (
2
).
Do not exceed the MAX marking!
4. Place the lid on and twist it clockwise
until you
feel some resistance
to lock it.
5. Hold the device firmly, press the
button and
keep it held down. The grinding process starts.
L
If the blades suddenly stop, it is possible
they may be blocked. Hold the device with
both hands and gently shake it to release the
blockage.
6. You can watch the grinding process through the
viewing window in the lid. Once the coffee has
reached the grinding fineness you want or after
20 seconds at the latest, let go of the
button.
The device stops.
7. Wait until the blades have come to a complete
standstill. Then pull the mains plug (
5
) out of the
plug socket.
8. Take off the lid.
9. Remove the coffee powder.
L
The grinding container should be cleaned
before switching to another type of coffee
(see the “Cleaning and Storage” chapter).