Designer Coffee Grinder
EN
19
■
The blades are sharp. Be careful
when handling the blades and emp-
tying and cleaning the device to
prevent any cut injuries.
■
The device must always be discon-
nected from the mains power when
it is left unattended, and before
it is assembled, disassembled or
cleaned.
■
Do not make any modifications to the
device. Also do not replace the con-
necting cable yourself. If the device
or its connecting cable are damaged,
they must be replaced by the manu-
facturer, customer service department
or a specialist workshop in order to
avoid any hazards.
■
Follow the cleaning instructions in the
“Cleaning and Storage” chapter!
DANGER – Danger of Electric Shock
■
Use and store the device only in closed rooms.
■
Do not operate or store the device in rooms with
high humidity.
■
Never immerse the device and the connecting
cable in water or other liquids and ensure that
they cannot fall into water or become wet.
■
If the device falls into water while it is connect-
ed to the mains power, pull the mains plug out
of the plug socket immediately.
Only after this
should you retrieve the device from the water.
Never attempt to pull it out of the water while it
is connected to the mains power!
■
If the device has fallen into water or other liquids,
do not use it. Before using it again, have it
checked by the manufacturer, customer service
department or an authorised distributor in order
to avoid possible hazards.