Professional Curler 5 in 1
EN
15
CLEANING AND
STORAGE
Please Note!
■
Do not wind the connecting cable
around the device.
■
Do not use any sharp or abrasive
cleaning agents or cleaning pads
to clean the device. These may
damage the surfaces.
• Wipe residues of styling products
off the attachment (
2
–
6
) immedi-
ately after use. Use a damp cloth
to do this.
• Wipe down the handle (
1
) with
a damp cloth if necessary. Then
wipe it with a dry cloth.
• Wash the glove (
7
) by hand. Do
not use fabric softener.
• Store the device in a cool, dry
place that is out of the reach of
children and animals.
TROUBLESHOOTING
If the device does not work properly,
check whether you are able to rectify
the problem yourself. If the prob-
lem cannot be solved with the steps
below, contact the customer service
department.
Do not attempt to repair an
electrical device yourself!
The device does not work.
The mains plug is not inserted in the
plug socket correctly.
►
Correct the fit of the mains plug.
The plug socket is defective.
►
Try another plug socket.
There is no mains voltage.
►
Check the fuse of the mains
connection.
The overheating protection has been
triggered.
►
Pull the mains plug out of the
plug socket and allow the device
to cool down completely. Then
try again.
The fuse in the fuse box is trig-
gered.
Too many devices connected to the
same circuit.
►
Reduce the number of devices in
the circuit.
Odour produced
The attachment (
2
–
6
) is dirty.
►
Clean the attachment (see the
“Cleaning and Storage” chapter).
Steam produced
The device is being used on wet hair.
►
This is moisture evaporating from
your hair.
