EN
14
Attaching / Detaching the
Attachment
• Plug the attachment (
2
–
6
) onto
the handle (
1
) until it engages.
The attachment must be oriented
so that the
symbol on the at-
tachment is at the top (in line with
the display (
10
) and the buttons)
and the stand (
8
) is at the bottom
(Picture C)
.
• To separate the attachment from
the handle, hold down the two
release buttons (
9
) and pull off the
attachment.
Styling
1. Comb through the hair before
using the device. Make sure there
are no knots in the hair.
2. Attach the attachment you want
to the handle (see above).
3. Fully unwind the connecting cable
and connect the mains plug to an
easily accessible plug socket.
The display (
10
) then shows
OFF
.
The device is ready to be used.
4. To switch on the device, hold
down the
ON/OFF
button (
12
) un-
til
180°C
appears on the display.
The device automatically begins
to heat the attachment up to
180°C. The current (constantly
rising) temperature is displayed.
5. The temperature can be set even
during the heating-up phase. To
do this, hold down the
+
or
–
but-
ton (
11
) until the temperature you
want appears on the display and
then let go.
After you let go of the button, the
current (constantly rising or falling)
temperature is displayed again.
6. Wait a moment until the attach-
ment has heated up. In the mean-
time, the device can be placed
down on the stand (
8
).
7. When the temperature display
stops changing, the set tempera-
ture has been reached. Styling can
now begin.
If all the hair is to be treated, start
at the neck and work your way
strand by strand to the forehead
as follows:
○
Divide the hair into sections.
○
Hold the attachment with the
tip pointing down 3 – 5 cm away
from your head.
Make sure it
does not touch the scalp!
○
Wind a strand of hair around the
attachment from top to bottom.
○
Hold it briefly (approx. 2 – 4 s),
then release the strand.
○
Carefully pull the attachment
away upwards or to the side.
8. To switch off the device, hold
down the
ON/OFF
button until
OFF
appears on the display.
L
The device automatically
switches off after 30 minutes.
9. Pull the mains plug out of the plug
socket and allow the attachment
to cool down.
10. Allow the hair to cool and then
finish styling it with styling prod-
ucts.