Steam Styler
EN
23
Styling
Please Note!
■
Do not use the device on wet hair. It must
be at least towel-dried!
■
Keep the heating plates away from the
face, in particular the eyes. Also maintain
a safe distance between the head and
heating plates of at least 3 – 5 cm.
Once the heating plates (
1
) have reached the
set temperature, you can begin styling.
If all the hair is to be treated, start at the
neck and work your way strand by strand to
the forehead as follows:
1. Divide the hair into sections.
2. Tauten one strand and place it between
the heating plates close to the root.
Make sure they do not touch the scalp!
3. Press together the heating plates.
4. Allow the device to glide in a fl owing
motion to the tips of the hair to
straight-
en
the hair
(Picture B)
.
If you want to create
curls
, wrap around
the device once and pull the strand
through in this position
(Picture C)
.
To make frizzy hair softer, place the
device on the lengths and leave the
hair curly at the root. This will main-
tain volume.
After Styling
1. To switch off the device, hold down the
On / Off button until the displays go
out.
After 60 minutes, the device switches
off automatically.
2. Pull the mains plug out of the plug socket
and allow the device to cool down.
3. Allow the hair to cool. Then fi nish styling
it with styling products.
02105_Inlay_de-en-fr-nl_80x210_V1.indb 23
02105_Inlay_de-en-fr-nl_80x210_V1.indb 23
13.07.2021 07:50:26
13.07.2021 07:50:26