
Steam Styler
EN
21
If necessary, hair spray or a little hair gel
can be used. However, apply it sparingly
and clean the device after each use (see the
“Cleaning and Storage” chapter).
Avoid using other styling products before
the treatment so that you do not damage
the hair. You should defi nitely only ever use
hair spray after using the device!
USE
Filling the Water Tank
For styling
with steam
the water tank (
7
)
needs to be fi lled with water. This is not
necessary for styling without steam.
Please Note!
■
Do not pour any additives into the water
tank. These could damage the device.
1. Make sure that the device is not connect-
ed to the mains power and is not hot.
2. Place your thumb in the notch next to the
water tank and remove it from the device
(Picture D)
.
3. Turn over the water tank and pull out the
silicone plug
(Picture E)
.
4. Pour approx. 10 ml of tap water through
the opening
(Picture F)
.
5. Place the silicone plug back into the
opening.
6. Wipe down the water tank with a cloth
if it got wet on the outside while being
fi lled.
7.
Check whether the water tank is wa-
tertight. It may only be inserted in the
device if it is watertight!
8. Insert the water tank into the device with
the small white rod (sticking out of the
water tank) fi rst
(Picture G)
. The small rod
is plugged into the round opening in the
water tank compartment.
02105_Inlay_de-en-fr-nl_80x210_V1.indb 21
02105_Inlay_de-en-fr-nl_80x210_V1.indb 21
13.07.2021 07:50:25
13.07.2021 07:50:25