Maxwell 9414761102957, Руководство пользователя

Страница: 61 / 72

AA702A.4: EXAMPLE THRUSTER WITH WINDLASS WIRING FOR AA710 _ SYSTEM
WARNING:
Power must be disconnected during installation and when making
any changes to wiring after installation.
IMPORTANT NOTES:
1. Refer to thruster manufacturers' specifications for fuse/breaker
and isolator requirements.
2. Refer to thruster manufacturers' specifications for main power
cable specifications.
3. An additional isolating switch should be installed for controls if the
main breaker or isolator is not readily accessible from the helm.
4. If thruster control circuit uses negative switching, connect a relay
between the AA702A output and the control wire to convert from positive
to negative switching.
5. Base Station must be positioned to allow internal access during
and after installation.
6. Stern and Bow output locations stated are the default locations.
These can be swapped in the AA710-6 system setup menu.
7. There must be an alternative method available to operate the windlass, thruster or other equipment.
A failure of the wireless link will result in loss of control of the equipment via the AA710-6.
8. Installations must be carried out in accordance with USCG, ABYC,
NMMA and BMEA requirements.
AA702A Base Station
Internal Connections
Other
Control / Panel
Control Circuit
Terminals
(Positive Switching)
BATT (-)
COM (+)
PORT (+)
STBD (+)
BATT (-)
COM (+)
PORT (+)
STBD (+)
Other
Control / Panel
BOW
THRUSTER
STERN
THRUSTER
WINDLASS SYSTEM
Refer to windlass wiring diagrams
AA702
TERM
Default Function
Assignment
BATT (-)
Ground
BATT (+)
Positive
OUT 1 (+) Windlass
Down
OUT 2 (+) Windlass
Up
OUT 3 (+) Thruster A (Bow)
Port
OUT 4 (+) Thruster A (Bow)
Starboard
OUT 5
White
(+) Thruster B (Stern)
Port
OUT 6
Brown
(+) Thruster B (Stern)
Starboard
AA702A Base Station Internal Connections
Other
Control / Panel
Control Circuit
Terminals
(Positive Switching)
BATT (-)
COM (+)
PORT (+)
STBD (+)
BATT (-)
COM (+)
PORT (+)
STBD (+)
Other
Control / Panel
BOW
THRUSTER
STERN
THRUSTER
AA702
TERM
Default Function
Assignment
BATT (-)
Ground
BATT (+)
Positive
OUT 1 (+) Windlass
Down
OUT 2 (+) Windlass
Up
OUT 3 (+) Thruster A (Bow)
Port
OUT 4 (+) Thruster A (Bow)
Starboard
OUT 5
White
(+) Thruster B (Stern)
Port
OUT 6
Brown
(+) Thruster B (Stern)
Starboard
Alternative Function
Power Enable when
dual thrusters selected
Notes:
See owners manual section for more details
All outputs are active high (+) at battery level. If the product control
system does not operate at this level relays must be used to isolate
the 702A and the controlled product
Notes:
See owners manual section for more details
All outputs are active high (+) at battery level. If the product control
system does not operate at this level relays must be used to isolate
the 702A and the controlled product
Windlass and Two thrusters
Two thrusters with power enable
Power enable for Hydraulic, AC, DC power pack
or PLC controller
Times out after 0- 60 Minutes
Thruster enable
Thruster enable