Maxum 4100 SCA Sportyacht, Дополнение к руководству пользователя

Страница: 19 / 56

Chapter 2: Components/Systems 13
4100 SCA Sport Yacht
•
Owner’s Manual Supplement
Inverter Power (Option)
Your yacht may feature an (optional) inverter which converts DC power from it’s battery to AC power for designated
accessories. The inverter is located in the utility room and can be accessed by removing the forward entry steps.
Before operating the inverter, read the inverter manual for detailed operating procedures and safeguards and observe
the following:
•
Accessories that can be powered by the inverter are identified by white breakers on the AC panel.
•
Activate the AC system under inverter power by switching on the inverter master breaker (located above the port
dinette) and pressing the on/off switch on the inverter control panel (located on the inverter).
•
The inverter runs off it’s own battery, which is located forward of the starboard engine, (see illustration on the top
of page 9). The inverter battery breaker is located on the battery switch panel inside the port transom storage tub.
•
The inverter features a built-in battery charger. The battery charger will charge it’s battery whenever the yacht is
plugged into a dockside connection or the (optional) generator is on.
FIRE, EXPLOSION & SHOCK HAZARD!
•
DO NOT alter shore power connectors and use only compatible connectors.
•
Before connecting or disconnecting the shore power cord to your yacht, verify all breakers
and switches on the AC master panel are turned OFF.
•
To prevent shock or injury from an accidental dropping of the “hot” cord into the water,
ALWAYS attach the shore power cord to the yacht inlet first; then to the dockside connec-
tion. When disconnecting from shore power, disconnect the shore power cord from the
dockside connection first.
•
NEVER leave a shore power cord connected to the dockside connection only.
•
Only use shore power cords approved for marine use. NEVER use ordinary indoor or out-
door extension cords that are not rated for marine use.
DANGER!
!
SHOCK & ELECTRICAL SYSTEM DAMAGE HAZARD!
•
NEVER connect dockside power to your yacht outside North America unless you have pur-
chased the international electrical conversion option.
•
The simultaneous use of several AC components can result in an overloaded circuit. It may
be necessary to turn off one or more accessories in order to use another accessory.
•
Use double insulated or three-wire protected electrical appliances whenever possible.
•
Periodically check the shore power cord(s) for deterioration or damage. Damaged or faulty
cords should NEVER be used since the danger of fire and electrical shock exists.
•
DO NOT pinch shore power cords in doors or hatches, or coil the shore power cord too
tightly since these situations can generate enough heat to result in a fire.
•
If a shore power cord should accidently become immersed in water, it should immediately
be sprayed with fresh water. THOROUGHLY dry the blades and contact slots and spray
with a moisture displacement before reusing.
CAUTI O N!
!