Maxtor Atlas SCSI Drive 15K II, Руководство по эксплуатации продукта

Страница: 163 / 260

SCSI Description
Maxtor Atlas 15K 5-97
5.23 READ CAPACITY Command (25h)
The READ CAPACITY command reports formatted capacity and track-boundary
information. The data format and field descriptions are shown in Table 5-128 and Table
5-129 respectively.
Table 5-128
READ CAPACITY Command-Data Format
Table 5-129
READ CAPACITY Command-Field Descriptions
Table 5-130 shows the READ CAPACITY Returned Data - Data Format that will be sent
during the data-in buffer transfer for the command. Refer to the PMI description in Table
5-129 for a description of these data fields.
Table 5-130
READ CAPACITY Returned Data-Data Format
Bit
Byte
7 6 5 4 3 2 1 0
0 Operation Code (25h)
1 Reserved RelAdr
2 - 5 Logical Block Address
6 - 7 Reserved
8 Reserved PMI
9 Control
Field Description
RelAdr Relative Addressing is not supported by the drive; the field must be 0.
Logical Block Address Used in conjunction with the PMI bit. Must be 0 when the PMI bit is 0.
PMI
Partial Media Indicator. When the value in the field is 0, the Returned Log-
ical Block Address (Table 5-130) is that of the last logical sector of the log-
ical unit.
When the value is 1, the Returned Logical Block Address is that of the last
sector on the same cylinder as the Logical Block Address supplied in the
Command Descriptor Block's LBA field. That is, the Returned Logical
Block Address is that of the Logical Block Address before a substantial de-
lay in data transfer will be encountered).
In either case, Block Length in Bytes (Table 5-130) is the unit's logical sec-
tor size, as determined by the Block Length field in the Mode parameter
Block Descriptor.
Bit
Byte
7 6 5 4 3 2 1 0
0 - 3 Returned Logical Block Address
4 - 7 Block Length in Bytes