background image

7

TROUBLESHOOTING

PROBLEM

POSSIBLE SOLUTIONS

Light will not 

switch on 

when there is 

movement in 

the detection 

area.

Ensure  that  the  power  switch  on  the  main  body  has  been

turned to the AUTO position.

Ensure that the motion sensor has been positioned to face

oncoming movement.

Ensure that the battery has been fully charged in direct sunlight 

for 3 sunny days. Refer to the “Before First Use of Your Solar

Security Light” section on page 4.

Check to see that the solar panel is facing south so that it

receives  direct  sunlight  for  most  of  the  day,  enabling  the

battery to fully charge.

Check to see that the LUX control has not been set too far

towards ( ). Setting the LUX control too far towards ( ) will

cause  the  Solar  Security  Light  to  turn  on  only  in  complete

darkness.

Check to see that the motion sensor is not near night time light 

sources such as street lights.

Light switches 

on during the 

day.

The LUX control may be set too far towards the (

) position.

Reposition the motion sensor.

Light switches 

on for no 

apparent 

reason.

The SENS control may be set too far towards the (+) position.

Moving trees, traffic, pets or birds may be getting in the area of

detection. This may be unavoidable, however the sensor could 

be redirected to a height where this is less likely to occur.

If there are reflective objects in the detection area such as

windows, water, or white walls, you may need to redirect or

possibly reposition the motion sensor.

Test  the  motion  sensor  by  covering  it  completely  with

cardboard and waiting several minutes to make sure it does

not detect motion. If the light still switches on, please contact

MAXSA for further assistance.

Light quickly 

flashes on and

off.

Battery charge may be low. Turn the power switch to the OFF 

position and charge the battery for three (3) sunny days with 

the solar panel placed in direct sunlight, ideally facing the 

Southern sky.

Move the LUX control more to the (

) position.

Light is not 

as bright as 

normal.

Battery charge may be low. Turn the power switch to the OFF 

position and charge the battery for three (3) sunny days with 

the solar panel placed in direct sunlight, ideally facing the 

Southern sky.

Содержание 44150-SL

















Отзывы: