MaxPro 111-0302, Руководство пользователя

Страница: 4 / 79

IImpact Drill MPID1050VD User Manual
4
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool
will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR IMPACT DRILL
ͻ Wear ear protectors with impact drills (exposure to noise can cause hearing loss)
ͻ Use auxiliary handles supplied with the tool (loss of control can cause personal injury)
ͻ Hold the power tool only by the insulated gripping surfaces when performing an operation where the
accessory may contact hidden wiring or its own power cord (contact with a “live” wire will also make
exposed metal parts of the power tool “live” and shock the operator); always use auxiliary handle
ͻ Use suitable detectors to find hidden utility lines or call the local utility company for assistance
(contact with electric lines can lead to fire or electrical shock; damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or an electrical shock)
ͻ Avoid damage that can be caused by screws, nails and other elements in your workpiece; remove them
before you start working
ͻůǁĂLJƐŬĞĞƉƚŚĞĐŽƌĚĂǁĂLJĨƌŽŵŵŽǀŝŶŐƉĂƌƚƐŽĨƚŚĞƚŽŽů
ͻ Secure the work piece (a work piece clamped with clamping devices or in a vice is held more securely
than by hand)
ͻtŚĞŶLJŽƵƉƵƚĂǁĂLJƚŚĞƚŽŽů͕ƐǁŝƚĐŚŽĨĨƚŚĞŵŽƚŽƌĂŶĚ ensure that all moving parts have come to a
complete standstill
ͻhƐĞĐŽŵƉůĞƚĞůLJƵŶƌŽůůĞĚĂŶĚƐĂĨĞĞdžƚĞŶƐŝŽŶĐŽƌĚƐǁŝƚŚĂ capacity of 16 Amps (U.K. 13 Amps)
ͻ/ŶĐĂƐĞŽĨĞůĞĐƚƌŝĐĂůŽƌŵĞĐŚĂŶŝĐĂůŵĂůĨƵŶĐƚŝŽŶ͕ immediately switch off the tool and disconnect the plug
ͻ Maxpro can assure flawless functioning of the tool only when original accessories are used
GB