21
Chapter 5 Operation Guide
Then select the COM port on the software and click the "Connect" button. After
connected, the button will turn green, as shown in Figure 2.
5-Software Function
1
、
Waveform Editing
When using the internal control mode, the waveform editing function plays the
role of waveform editing,the pulse shape editing is set by the control software,
as shown in Figure 3,The pulse shape editing includes the time inflection point
and the power at the inflection point of the waveform.
NOTE:
◎
Pulse width time is measured in ms intervals.
Figure 1
Figure 2
Figure 3
