7
Chapter 2 General Safety Information
NOTE :
◎
This device is classified as a high power Class IV laser instrument which
emits light with the wavelength of 1080nm and the optical output power is up
to 1500W. This level of light may cause damage to the eye and skin. Despite the
radiation being invisible, the beam may cause irreversible damage to the retina.
The manufacturer of the laser system is responsible for the safety compliance
according to the applicable standards and regulations.
2-Laser Protection
1
、
Laser Protection Requirements
You must wear the safety protective glasses while operating the laser, and
rationally select the safety protective glasses according to the lasing wavelength
of the laser. If the device is a tunable laser or Raman product, it emits light
over a range of wavelengths and the end user should confirm the laser safety
eyewear used protects against light emitted by the device over its entire range
of wavelength.
2
、
Laser Protective Equipment Suppliers
Maxphotonics recommends material or equipments provided by following laser
protective equipment suppliers for you, including LaserVision USA, Kentek
Corporation, Rochwell Laser Industries, etc. All the supplier information is
provided by Maxphotonics only for the convenience to use, so Maxphotonics
assumes no responsibility for any problem caused by using the products of
abovementioned suppliers.
